SKU: TB-VANFORD Categories: ,

SHIMANO VANFORD


From: د.إ 830.00

(Approx. $226.00 - $242.34)

Shimano Technology Found In Vanford Spinning Reels:

  • CI4+ Body – An enhanced version of the original CI4 material, this highly technical carbon material is 2.5 times stiffer than the original and is used to create weight savings on the reel.
  • MGL Rotor – The Magnumlight Rotor is 25% lighter and allows for better balance and requires 22% less inertia, which makes it easier to start and stop the retrieve for a smoother feel.
  • Hagane Gear – Boasting amazing strength and durability, Hagane Gear is a process in which the gearing is calculated in minute detail and cold forged instead of being cut. This application of state-of-the-art technologies gives the angler reel smoothness from the first use through years of enjoyment.
  • Micro Module II Gear – State-of-the-art gear design makes use of smaller gear teeth and more of them, which results in a more efficient gear train and much smoother retrieve.
  • SilentDrive – A long list of fine-tuned internal micro adjustments and enhancements that reduce any handle play and noise from moving parts.
  • X-Protect – By combining a water repellant coating and a specially designed water channeling labyrinth construction, X-Protect provides high-level water resistance without adding weight or sacrificing light rotor rotation.
  • G-Free Body – G-Free Body technology enables the reel’s center of gravity to be moved closer to the center of the reel seat, and therefore the anglers hand position. This shift in weight and balance helps to reduce fatigue and enhance casting comfort.
  • X-Ship – By supporting the pinion gear on both ends with bearings, the pinion gear remains in precise alignment with the drive gear and stays in the same position under even the heaviest of loads. This eliminates friction between the spool shaft and gear which translates to better casting performance and increased gear durability.
  • Long Stroke Spool – By increasing the height of the spool, the line is able to be laid on the spool without the spool having to fully oscillate as frequently. This results in the line having to change direction while coming off the spool fewer times during a cast, resulting is less turbulence going through the guides for a smoother and longer cast.
  • Propulsion Line Management System – The most obvious component of this system is the Propulsion spool lip design, which has been proven through tens of thousands of casting tests and computer simulations to provide longer casts while preventing backlashes and wind knots.
  • Aero Wrap II – Utilizing a patented worm gear design, this two-speed oscillation system lays the line onto the spool in a X pattern that reduces line-on-line friction and helps to increase casting distance.
  • Cross Carbon Drag (C3000-C5000) – Allows for a wider range of drag settings, enhanced drag washer durability, and the smoothest Shimano drag performance ever.
  • Water-Resistant Drag – With the use of rubber gaskets the drag is sealed against intrusion of the elements such as water and dust.
  • One-Piece Bail – One-Piece Bail allows the line to travel unimpeded to the line roller. Its seamless design reduces friction and the change of tangles or cuts to the bail arm.
  • S A-RB Bearings – These bearings undergo the same anti-corrosion process as Shimano’s A-RB Bearings, with the addition of shields on both sides of the bearings to reduce the possibility of salt, dirt, or other foreign objects inhibiting the bearing’s rotation.

Compare
Clear selection

Share it:
  Ask a Question
Brands:SHIMANO

Shimano Technology Found In Vanford Spinning Reels:

  • CI4+ Body – An enhanced version of the original CI4 material, this highly technical carbon material is 2.5 times stiffer than the original and is used to create weight savings on the reel.
  • MGL Rotor – The Magnumlight Rotor is 25% lighter and allows for better balance and requires 22% less inertia, which makes it easier to start and stop the retrieve for a smoother feel.
  • Hagane Gear – Boasting amazing strength and durability, Hagane Gear is a process in which the gearing is calculated in minute detail and cold forged instead of being cut. This application of state-of-the-art technologies gives the angler reel smoothness from the first use through years of enjoyment.
  • Micro Module II Gear – State-of-the-art gear design makes use of smaller gear teeth and more of them, which results in a more efficient gear train and much smoother retrieve.
  • SilentDrive – A long list of fine-tuned internal micro adjustments and enhancements that reduce any handle play and noise from moving parts.
  • X-Protect – By combining a water repellant coating and a specially designed water channeling labyrinth construction, X-Protect provides high-level water resistance without adding weight or sacrificing light rotor rotation.
  • G-Free Body – G-Free Body technology enables the reel’s center of gravity to be moved closer to the center of the reel seat, and therefore the anglers hand position. This shift in weight and balance helps to reduce fatigue and enhance casting comfort.
  • X-Ship – By supporting the pinion gear on both ends with bearings, the pinion gear remains in precise alignment with the drive gear and stays in the same position under even the heaviest of loads. This eliminates friction between the spool shaft and gear which translates to better casting performance and increased gear durability.
  • Long Stroke Spool – By increasing the height of the spool, the line is able to be laid on the spool without the spool having to fully oscillate as frequently. This results in the line having to change direction while coming off the spool fewer times during a cast, resulting is less turbulence going through the guides for a smoother and longer cast.
  • Propulsion Line Management System – The most obvious component of this system is the Propulsion spool lip design, which has been proven through tens of thousands of casting tests and computer simulations to provide longer casts while preventing backlashes and wind knots.
  • Aero Wrap II – Utilizing a patented worm gear design, this two-speed oscillation system lays the line onto the spool in a X pattern that reduces line-on-line friction and helps to increase casting distance.
  • Cross Carbon Drag (C3000-C5000) – Allows for a wider range of drag settings, enhanced drag washer durability, and the smoothest Shimano drag performance ever.
  • Water-Resistant Drag – With the use of rubber gaskets the drag is sealed against intrusion of the elements such as water and dust.
  • One-Piece Bail – One-Piece Bail allows the line to travel unimpeded to the line roller. Its seamless design reduces friction and the change of tangles or cuts to the bail arm.
  • S A-RB Bearings – These bearings undergo the same anti-corrosion process as Shimano’s A-RB Bearings, with the addition of shields on both sides of the bearings to reduce the possibility of salt, dirt, or other foreign objects inhibiting the bearing’s rotation.

Brand

SHIMANO

SELECT MODEL

VF3000XG, VF4000XG, VF5000XG

General Inquiries

There are no inquiries yet.

Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Navigation

MY CART

Close

No products in the cart.

No products in the cart.